Ultra-fast curing multi-purpose polyaspartic coating, allowing for the installation of a floor system in one day.
Poly-Guard Technology
CHEM1000 PG™ is a two-component (1:1) polyaspartic coating system. It is used as a colored base coat as well as a clear topcoat, using a common hardener.
This product allows for a fast return to service thanks to a very short curing time (dry to the touch in approximately 180 minutes) under normal conditions, allowing for the installation of a floor coating system in a single day.
It offers superior mechanical and chemical properties, requires low maintenance, and ensures an excellent aesthetic finish with full UV stability.
If necessary, we recommend using CHEMTEC vinyl flakes, quartz, or aggregates in combination with our other products.
Supplied clear: pigments are sold separately (see the CHEMTEC™ color chart). Infinite combinations of colors and textures can be achieved by dispersing colored flakes, colored quartz, or silica sand.
Application steps
1. Surface repairs
2. Surface preparation
3. Mix components (A:1 / B:1)
4. Pour the mixture
5. Apply
• Solids content: 85% (Poly-Guard technology)
• A/B mixing ratio: 1:1
• Working time: 20 to 25 minutes
• Drying time: 2 hours at 22°C (72°F)
• Ideal use: topcoats over flakes and exterior applications
• Concrete surfaces
• Decorative flakes / chips
• Decorative quartz
• Metallic coating system
• High / low build systems
• Mortars
• Cementitious coatings
• Polymer floors
2-gallon kit (7.56 L)
