Anchoring of street furniture

APPLICATION

Bonding

Prepare the Resin + hardener mixture directly in the bucket using a wooden paddle or a mixer mounted on an electric drill.

Then pour strips or dabs of the mixture onto the properly prepared substrates (sweeping and compressed air if necessary) and directly place the ID edgings or bollards.

Should reprofiling of the substrate be necessary, prepare a DURCEL mortar by thoroughly incorporating and mixing ½ or 1 volume of dry sand or blasting sand into the Resin + hardener mixture.

For recycled rubber tiles, bond the prepared substrate with a notched trowel at a rate of 750 g to 1 kg per m², depending on the flatness and porosity of the substrate.

Smooth thoroughly.